Valvoline VR1 Racing Brake Fluid is a high-boiling glycol fluid built for motorsport and track use, where brakes reach temperatures that boil ordinary road fluid. With a dry boiling point well above the DOT 4 requirement, it holds a firm pedal through repeated heavy braking, lap after lap. The 500ml bottle is sized for a fresh flush before a track day or race meeting.
A brake fluid built for the track
On a race track or a hard track day, brakes reach temperatures that boil ordinary road fluid, and once the fluid boils the pedal goes long and the car will not pull up. This high-boiling glycol fluid is built for that environment, with a dry boiling point well above the DOT 4 requirement so it holds a firm pedal lap after lap.
Why the boiling point is everything
Repeated heavy braking dumps enormous heat into the fluid at the calliper. The extra dry boiling point headroom is what keeps the fluid liquid and incompressible through that heat, so the driver keeps a consistent, predictable pedal when it matters most. Corrosion inhibitors protect the calliper and cylinder internals through the season.
For competition use
It clears the DOT 4 requirement with margin and is intended for motorsport, track-day and high-performance use. Because racing fluids are worked hard and absorb moisture over time, a fresh flush before an event keeps the boiling performance where it should be. The 500ml bottle is sized for a pre-event bleed.
Where it fits
It suits competition cars, track-day vehicles and high-performance road cars that punish their brakes, wherever a standard road fluid would fade under sustained hard use.
Getting the most on track
Racing fluid earns its boiling-point advantage only when it is fresh, and because glycol fluid absorbs moisture quickly under hard use, a flush before each event or track day is normal practice rather than an annual habit. Bleed thoroughly to clear any air, since air in the system does the same thing as boiled fluid and gives a long, soft pedal. Use fluid from a sealed bottle, keep it off paint, and do not mix in a silicone DOT 5 product. It remains a glycol DOT 4 fluid, so it is compatible with standard road systems, which makes a pre-event flush and a return to normal service straightforward.