Pushing oil down long modular pipework or moving heavier grades needs pressure more than raw flow, and the higher ratio delivers it. The RAASM 115F/121 is a 1200 Series industrial stub pump at 12:1, built for pressure-led distribution from a modular drum or tank.
It is a modular flanged pneumatic stub pump at a 12:1 ratio, delivering up to 30 lpm. The higher ratio trades some flow for more outlet pressure per unit of air, which is what holds delivery through long runs and higher-resistance systems where the 9:1 version would sag.
The body and suction tube are carbon steel, built for a fixed industrial installation and the duty that comes with it. It runs on a maximum 8 bar (800 kPa / 116 psi) air supply at 80 dB, and handles oils, lubricants and similar products.
The air inlet is G 1/2in (female) and the fluid outlet G 3/4in (female), both BSP, so it flanges into Australian modular systems without an adapter. It draws up to about 2800 lpm of air at 8 bar (800 kPa / 116 psi), so confirm your compressor sustains that.
Match the ratio to the job: where you want more flow at lower pressure for shorter runs, the 115F/91 is the 9:1 version at 45 lpm, and this 12:1 is the choice for pressure down long lines.