Valvoline Dexron III ATF is a mineral automatic transmission fluid for older automatics, power steering systems and hydraulic applications that call for a Dexron III or Mercon fluid. It delivers the friction and viscosity those units were designed around, for smooth shifts and reliable service. The 4L pack suits a single transmission or power steering service.
The right fluid for older automatics
Older automatics were designed around a particular friction and viscosity, and giving them exactly that is what keeps shifts smooth and the transmission reliable. This mineral ATF delivers the friction and viscosity a Dexron III or Mercon system was built around, and the same properties suit many power steering and hydraulic uses.
Matched friction and viscosity
An automatic transmission relies on the fluid to transmit power through the torque converter and to engage clutches with the right feel, both of which depend on the fluid's friction characteristics. Dexron III ATF provides the friction and viscosity older automatics were built around, so shifts stay smooth and the transmission works as intended. The same properties suit many power steering and hydraulic uses that specify this fluid.
Broad older-vehicle coverage
It meets Dexron IIIH, Ford Mercon and Allison C4, covering a wide range of older automatics and power steering systems.
Where it fits
It suits older automatic transmissions and power steering systems specifying Dexron III or Mercon. Where a vehicle requires a newer fluid such as Dexron VI, use that instead, and confirm the specification before service.
Using the correct ATF
Dexron III is the right fluid for older automatics and many power steering systems that specify it, but modern transmissions that call for Dexron VI or a dedicated fluid should use those instead, so confirm the specification before filling. Follow the maker's service interval, and change sooner where the transmission tows or runs hot, since heat ages the fluid and degrades shift quality. Check and set the level correctly, usually with the transmission warm and running per the maker's method, since both overfilling and underfilling cause problems. In the older automatics and power steering systems it suits, the matched friction and viscosity are what keep operation smooth and the components protected.