Valvoline EPG Industrial Gear Oil 150 is an ISO 150 mineral gear oil with sulphur-phosphorus extreme pressure additives, engineered for enclosed industrial gearboxes under heavy and shock loading. It combats the leading causes of gear failure, deposits, rust and wear, while resisting oxidation and foaming for long, reliable service. The 20L pack suits plant maintenance and individual gearbox changes.
Extreme-pressure protection for enclosed gearboxes
Gear systems fail from a short list of causes, chiefly deposits, rust and wear, and an industrial gear oil is judged on how well it combats all three. This ISO 150 mineral oil is formulated with sulphur-phosphorus extreme pressure (EP) additives for enclosed gearboxes under heavy and shock loading, so critical drives keep running.
How the EP additives work
Under heavy or shock loading, the oil film between gear teeth is squeezed thin and metal comes close to metal. The sulphur-phosphorus EP additives react at those high-pressure contact points to form a protective layer that carries the load and prevents the scuffing and welding that destroy gear faces. The ISO 150 viscosity provides the film thickness that general-purpose industrial drives are designed around.
Clean, long service life
Beyond load carrying, the formulation resists oxidation, foaming and corrosion, which keeps the oil serviceable through long drain intervals and protects the gearbox internals between changes. It meets recognised industrial standards including AGMA 9005-EO2, DIN 51517 Part 3 and US Steel 224.
Where it fits
It suits enclosed industrial gear drives in manufacturing, processing and materials-handling plant. Where a drive runs heavier or slower and needs a thicker film, a higher ISO grade is the better match, so selecting to the gearbox maker's viscosity recommendation gives the intended service life.
Selecting and maintaining the oil
Industrial gearboxes are designed around a specific ISO viscosity, so match the grade to the gearbox maker's recommendation rather than assuming a heavier oil is always better, since too high a viscosity can run hot and too low leaves the film thin. Keep the oil clean and at the right level, watch for water contamination in damp environments, and change at the recommended interval or when oil analysis shows it is due. On a first fill or an oil change, draining the box warm and flushing out old, contaminated oil gets the best from the fresh charge. Consistent viscosity and clean oil are what deliver the long gear life the EP additives are there to protect.