Valvoline EPG Industrial Gear Oil 220 is an ISO 220 mineral gear oil with sulphur-phosphorus extreme pressure additives, built for heavily loaded enclosed gearboxes that need a heavier film than an ISO 150. It delivers strong load-carrying capacity while resisting oxidation, foaming and corrosion for dependable, long-interval service. The 20L pack suits individual gearbox changes and plant maintenance.
A heavier grade for higher-load drives
Slower, more heavily loaded gears need a thicker oil to keep the teeth separated under pressure, which is where an ISO 220 grade earns its place over a lighter ISO 150. This mineral oil pairs that heavier film with sulphur-phosphorus extreme pressure (EP) additives, delivering strong load-carrying capacity for demanding enclosed gearboxes.
How the EP additives work
When load squeezes the film thin, the sulphur-phosphorus additives react at the contact points to form a protective layer that carries the pressure and prevents scuffing and welding of the gear faces. Combined with the ISO 220 film thickness, that gives strong protection for demanding, high-torque drives.
Clean, long service life
The oil resists oxidation, foaming and corrosion so it stays serviceable through long intervals and keeps the gearbox internals protected. It meets AGMA 9005-EO2, DIN 51517 Part 3 and US Steel 224.
Where it fits
It suits heavily loaded enclosed gearboxes in manufacturing and materials-handling equipment. Matching the ISO grade to the gearbox maker's recommendation is what delivers the intended life, so a lighter or heavier grade may suit faster or slower drives respectively.
Selecting and maintaining the oil
An ISO 220 grade suits heavier-loaded or slower drives, but the right choice is always the gearbox maker's specified viscosity, since a mismatched grade either runs hot or leaves the film too thin under load. Keep the oil clean and topped to level, guard against water ingress in wet environments, and change at the recommended interval or when analysis indicates. Draining the gearbox warm removes more of the old, contaminated oil and lets the fresh charge work as intended. Getting the viscosity and cleanliness right is what allows the extreme-pressure additives to protect the gears through the long, heavy duty cycles these drives run.