Valvoline EPG Industrial Gear Oil 320 is an ISO 320 mineral gear oil with sulphur-phosphorus extreme pressure additives, formulated for the most heavily loaded, slow-speed enclosed gearboxes. Its thick, tenacious film maximises load-carrying capacity and resists squeeze-out, while oxidation and foam resistance keep the oil serviceable through long drains. Supplied in a 20L pack.
Maximum film strength for the heaviest drives
The heaviest, slowest-turning gearboxes squeeze a lighter oil straight out of the contact zone, so they call for the thickest, most tenacious film. This ISO 320 mineral oil, fortified with sulphur-phosphorus extreme pressure (EP) additives, is formulated for exactly those high-torque, low-speed drives, maximising the film that stays in place under heavy, slow loading.
How the EP additives work
At the tooth contact, the sulphur-phosphorus additives react under pressure to build a protective layer that carries extreme load and resists the scuffing and welding that would otherwise wreck the gear faces. The ISO 320 viscosity maximises the film that stays in place under heavy, slow loading.
Clean, long service life
The formulation resists oxidation, foaming and corrosion so the oil holds up through long drains and keeps the gearbox clean and protected. It meets AGMA 9005-EO2, DIN 51517 Part 3 and US Steel 224.
Where it fits
It suits high-torque, low-speed industrial gearboxes in heavy manufacturing and mineral processing. Selecting to the gearbox maker's viscosity recommendation is important, since an over- or under-specified grade will not protect a heavily loaded drive as intended.
Selecting and maintaining the oil
An ISO 320 grade is chosen for the heaviest, slowest drives, but always confirm it against the gearbox maker's recommendation, since these high-torque boxes are designed around a particular viscosity and film thickness. Keep the oil clean and at level, protect it from water ingress, and change at the specified interval or when oil analysis calls for it. Because these drives run slow and hot, draining warm to carry out contamination and refilling with a clean charge matters for service life. With the correct viscosity and clean oil, the extreme-pressure additives can do their job of protecting the gear faces under the shock and load these applications generate.