Valvoline SynPower CVT is a premium full synthetic, multi-vehicle continuously variable transmission fluid for passenger cars and vans using belt and chain-driven CVTs. It is engineered to maintain the precise friction a CVT needs to prevent belt slip, shudder and overheating, protecting the transmission across a wide range of makes. Supplied in a 5L pack.
A dedicated fluid for continuously variable transmissions
A CVT transfers drive through a steel belt or chain running between variable pulleys, and it depends on a very specific friction level to grip without slipping. This premium full synthetic, multi-vehicle CVT fluid is engineered to deliver and hold that precise friction, keeping belt and chain-driven transmissions smooth, cool and protected.
Why CVT fluid is different
A CVT transfers drive through a steel belt or chain running between variable pulleys, and it depends on a very specific friction level to grip without slipping. Too little friction and the belt slips and wears; the wrong friction character and the transmission can shudder or overheat. SynPower CVT is engineered to deliver and hold that precise friction, keeping the transmission smooth, cool and protected across a wide range of makes.
Multi-vehicle coverage
It covers a broad list of belt and chain CVT specifications from Japanese, Korean and European makers, which lets one fluid serve many CVT applications.
Where it fits
It suits passenger-car and van CVTs. Because CVT fluids are matched closely to the transmission, confirm your vehicle's CVT fluid specification is covered before use, and do not substitute a conventional ATF.
Why CVT fluid is not interchangeable
A CVT depends on a very specific fluid to grip its belt or chain without slipping, so a CVT fluid must never be replaced with a conventional ATF, and even among CVT fluids you should confirm your vehicle's specification is covered before filling. Follow the maker's service interval, and change sooner where the transmission runs hot or works hard, since a CVT is sensitive to fluid condition and heat. A shudder, flare or hot-running CVT often traces back to worn or incorrect fluid, which a correct, fresh fill addresses. Set the level precisely by the maker's method, as a CVT is particularly intolerant of an incorrect fluid level.