Valvoline Engine Armour Synthetic Technology 10W30 is a semi-synthetic engine oil for petrol passenger cars, SUVs and light commercial vehicles, built on a combination of high-tech synthetic and premium conventional base stocks with latest generation additive technology. It meets the current API SQ and ILSAC GF-7A standards, is API Resource Conserving, and carries Low-Speed Pre-Ignition protection for turbocharged and direct-injection petrol engines. Petrol engines only.Â
Current API SQ and ILSAC GF-7A protection
API SQ and ILSAC GF-7A are the latest petrol engine oil standards, and Engine Armour Synthetic Technology 10W30 meets both. API SQ is fully backwards compatible with API SP and API SN Plus/RC and can be used where API SN, SM and SL is recommended, so a single grade covers a wide span of petrol vehicles. It also meets ILSAC GF-6A, GF-5 and GF-4 and carries the API Resource Conserving designation.
Why LSPI protection matters
Low-Speed Pre-Ignition is a destructive combustion event that turbocharged gasoline direct injection (TGDI) and gasoline direct injection (GDI) engines can suffer at low engine speed and high load, and OEMs specifically called for engine oils that help prevent it. This oil was developed in response. The advanced additive system also provides excellent wear protection and enhances engine life without affecting emissions system lifetime, while viscosity control delivers enhanced durability and lower oil consumption.
Cold flow and deposit control
Low temperature viscosity control results in easy cold start while providing maximum cold start protection: CCS viscosity is below 6700 mPa.s at –25 °C and the pour point is –39 °C. Against a conventional motor oil, the formulation gives improved wear control, deposit protection, volatility and low temperature flow, which is what helps an engine maintain peak performance longer between services.
Where it fits
It suits virtually all naturally aspirated, turbocharged and supercharged petrol passenger cars, passenger SUVs and light commercial vehicles specifying a 10W30, including engines running the longer drain intervals found in today's passenger vehicles. It is not recommended for use in diesel fuelled engines. Always consult the vehicle owner's manual before use.
Choosing and changing it
Choose Engine Armour Synthetic Technology 10W30 when your petrol engine specifies a 10W30 and you want the current API SQ and ILSAC GF-7A standards rather than an older API SN or GF-5 oil, particularly if the engine is turbocharged or direct-injection and needs LSPI protection. Confirm the grade and any maker approval in the owner's manual before selecting. Follow the service schedule for oil and filter changes and shorten it for stop-start, short-trip or towing duty. Top up with the same grade, and keep it to petrol engines.