Valvoline Engine Armour Synthetic Technology 10W40 is a semi-synthetic engine oil for petrol and diesel passenger cars and light commercial vehicles, formulated on a combination of synthetic and mineral base oils with an advanced additive system. It meets API SP and is rated ACEA A3/B4, with VW 501.01, 502.00 and 505.00 and MB 229.1 coverage. The 40 hot grade holds a firm film under sustained load and heat.
One semi-synthetic for petrol and diesel
Engine Armour Synthetic Technology 10W40 was developed to meet the demanding requirements of the engine manufacturers, combining synthetic and mineral base oils with the most advanced additive system available. That mix is what lets a single grade cover both petrol and light duty diesel engines in passenger cars and light commercials rather than needing a separate oil for each.
Why the ACEA A3/B4 rating matters
ACEA A3/B4 is the European rating for petrol and direct-injection diesel engines that run a full-viscosity, high-SAPS oil, and it is what a large share of European vehicles specify. It goes with a formulation built for stay-in-grade performance: viscosity control delivers enhanced durability and lower oil consumption, while the additive system fights the major causes of engine stress – heat, deposits and wear – from start-up to shut down without affecting emissions system lifetime.
Approvals and cold start
It meets API SP and API SN, SM and SL, is rated ACEA A3/B4, and carries VW 501.01, 502.00 and 505.00 and MB 229.1, so it matches the requirement rather than just the grade for a wide range of European vehicles. Low temperature viscosity control results in easy cold start while providing maximum cold start protection, with a CCS viscosity below 6700 mPa.s at –25 °C and a pour point of –39 °C.
Where it fits
It suits passenger and light duty commercial vehicles fitted with petrol or diesel engines specifying a 10W40, including naturally aspirated and turbocharged applications. Please consult the owner's manual before use.
Choosing and changing it
Choose Engine Armour Synthetic Technology 10W40 when the vehicle specifies a 10W40 and an ACEA A3/B4 oil, or where a VW 501.01/502.00/505.00 or MB 229.1 requirement applies – that approval list is the reason to pick it over a general-purpose 10W40. Confirm the grade and approval in the owner's manual first. Follow the service schedule for oil and filter changes and shorten it for stop-start, short-trip, towing or heavy-load duty. Top up with the same grade.