Valvoline SynPower DT C2 0W30 is a full synthetic, mid-SAPS engine oil that protects the engine and the emissions system at the same time. Built to ACEA C2 with Ford and Jaguar Land Rover approvals, it suits modern diesels with a DPF and petrol engines with a catalyst, while its low-viscosity 0W30 grade improves cold flow and fuel economy. The 6L pack suits a single-car service.
A mid-SAPS C2 oil that protects engine and emissions system
Protecting the engine and the emissions system at the same time is the job of a mid-SAPS oil, and this full synthetic ACEA C2 0W30 does it while adding fuel-economy benefit. Its low-ash chemistry keeps a diesel particulate filter and catalyst clear, and the low-viscosity 0W30 grade cuts cold-start drag and internal friction.
Efficiency and aftertreatment protection together
The mid-SAPS chemistry keeps ash, phosphorus and sulphur down to protect the DPF and catalyst, while the 0W30 grade cuts cold-start drag and internal friction for better economy. The 0W cold rating gives very fast oil flow on start-up, protecting the engine in the first seconds when most wear happens.
Matched approvals
It meets ACEA C2 with approvals including Ford and Jaguar Land Rover, covering the engines that specify this grade.
Where it fits
It suits modern petrol and diesel cars with emissions hardware specifying a C2 0W30. Confirm the exact grade and approval your engine requires before selecting.
Getting the specification right
An ACEA C2 oil is a low-friction, mid-SAPS grade matched to specific engines, so confirm your vehicle calls for a C2 0W30, such as certain Ford and Jaguar Land Rover models, before selecting. The mid-SAPS chemistry protects the diesel particulate filter and catalyst, while the low-viscosity 0W30 grade cuts cold-start drag and saves fuel, so it belongs in engines designed for it. Follow the service schedule, top up with the same specification, and keep to the correct grade. In the right vehicle, the fast cold flow protects the engine in the first seconds after start-up while the C2 chemistry looks after the emissions system and economy together.