Valvoline Valcomp 46 is an ISO 46 compressor oil for rotary and reciprocating air compressors, with an additive package built to resist oxidation, corrosion and foam. It keeps valves and vanes free of carbon and varnish so compressors deliver clean, efficient air with reliable oil life. The 205L drum is the bulk choice for operations running several compressors.
Purpose-built for air compressors
An air compressor is a hard place for an oil: it runs hot, works the oil against oxygen constantly, and any breakdown shows up as carbon and varnish on the valves and vanes. This ISO 46 compressor oil is built specifically to resist that, with an additive system that keeps the air end clean and the compressor running cool and efficient.
How it protects the compressor
Its advanced additive system delivers strong antioxidant, anti-corrosion and anti-foam performance. The antioxidants slow the oxidation that forms deposits at high temperature, so valves, vanes and the air end stay clean and the compressor keeps running cool and efficient. Anti-foam control keeps the oil delivering a consistent film, and corrosion inhibitors protect the internals.
Clean running, longer oil life
By keeping deposits down and resisting oxidation, the oil holds its condition longer, which supports reliable air delivery and sensible service intervals. It meets DIN 51506 VD-L, a recognised air-compressor lubricant classification.
Where it fits
It suits industrial and mobile air compressors in workshops, farms and manufacturing, both rotary screw and reciprocating types. Running an oil formulated for compressor duty, rather than a general industrial oil, is what keeps carbon and varnish off the valves and vanes over the long term.
Service and oil life
Compressor oil works hardest at high temperature, so keeping the compressor cooling clean and the oil at the right level helps it reach its full service life. Change the oil at the maker's recommended hours, or sooner in dusty or hot conditions, and replace or clean the air intake filter on schedule so grit does not shorten the oil's life or wear the air end. When changing, drain warm to carry out more of the old oil and any moisture, and confirm the ISO grade matches the compressor's requirement. Clean oil, changed on time, is what keeps valves and vanes free of the carbon and varnish that rob a compressor of efficiency.