Valvoline Ultramax HVI 32 is a high viscosity index ISO 32 hydraulic oil that holds a stable film from cold start to hot running, suiting mobile and outdoor equipment across seasons. It protects pumps and valves against wear and carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk choice for fleets and sites running mobile hydraulic equipment.
A high-VI oil for mobile and outdoor hydraulics
Viscosity index measures how much an oil thins as it heats, and a high-VI oil changes viscosity less, staying close to its intended thickness whether cold on start-up or hot after hours of work. This ISO 32 high-VI hydraulic oil holds a stable film across that swing, which is exactly what mobile and outdoor equipment needs.
Why that matters outdoors
Mobile and outdoor equipment starts cold and works hot, and an ordinary hydraulic oil can be sluggish at start-up and too thin once warm. The high viscosity index keeps Ultramax HVI 32 in its working range across that swing, so pumps and valves get consistent flow and protection. The lighter ISO 32 grade suits systems that benefit from faster response and cold-weather flow.
Anti-wear protection and wide approvals
It protects pumps and valves against wear and carries broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, meeting ISO 11158 HV and DIN 51524 Part 3.
Where it fits
It suits mobile plant, machine tools, compressors and outdoor hydraulics that see a wide temperature range. Confirm the ISO grade your system specifies before selecting.
Cleanliness and grade selection
Hydraulic systems fail more often from dirty oil than worn-out oil, so keep the fluid clean: store it sealed, filter on filling, and maintain the system's filters, since fine contamination is what scores pumps and valves. Match the ISO grade to the equipment maker's recommendation, and choose an HVI grade like this where the machine works across a wide temperature range and benefits from stable viscosity from cold start to hot running. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. Clean oil of the right grade is what lets the anti-wear additives protect the system as intended.