Valvoline Ultramax HVI 68 is a high viscosity index ISO 68 hydraulic oil that holds a stable film across a wide temperature range, suited to hot, higher-load mobile and outdoor systems. It protects pumps and valves and carries wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk choice for fleets and sites running heavy mobile equipment.
A heavier high-VI oil for hot, higher-load systems
Hot, hard-working hydraulic systems need a heavier body that holds up where a lighter grade would thin too far. This ISO 68 high-VI oil provides that thicker film for higher-load mobile and outdoor systems, while the high viscosity index keeps it close to its intended thickness across a wide temperature range.
Film strength across temperatures
The high viscosity index keeps the oil close to its intended thickness as it heats, and the ISO 68 grade provides a thicker film for higher-pressure, higher-temperature systems. Together they give pumps and valves a robust, consistent film whether the machine is cold or working hard.
Anti-wear protection and wide approvals
It protects pumps and valves against wear and carries broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, meeting ISO 11158 HV and DIN 51524 Part 3.
Where it fits
It suits hard-working mobile plant and outdoor hydraulics running hot under load and specifying an ISO 68. Confirm the ISO grade your system specifies before selecting.
Cleanliness and grade selection
Keep hydraulic oil clean, since fine contamination scores pumps and valves and is the usual cause of failure: store it sealed, filter on filling, and maintain the system filters. The heavier ISO 68 HVI grade suits hotter, higher-load systems, but the right choice is always the equipment maker's specified grade, so confirm before selecting. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. The high viscosity index keeps the oil in its working range across temperatures, so pumps and valves get a consistent film whether the machine is cold or working hard, and clean oil of the right grade is what makes that protection last.