Valvoline Ultramax 32 is an ISO 32 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves against wear, corrosion and high pressure. Its lighter grade suits precision and cooler-running systems, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 20L pack is the practical choice for workshops and single-machine servicing.
An anti-wear hydraulic oil for precision systems
Hydraulic pumps and valves run at high pressure with fine clearances, and an anti-wear oil forms a protective film on those surfaces to prevent the wear that leads to lost pressure and internal leakage. This zinc-based, non-detergent ISO 32 grade delivers that protection in precision and cooler-running systems where fast oil response matters.
How the anti-wear chemistry protects the system
Hydraulic pumps and valves run at high pressure with fine clearances, and the zinc anti-wear additives form a protective film on those surfaces to prevent the metal-to-metal wear that leads to lost pressure and internal leakage. The non-detergent formulation is designed to let water and contaminants separate out rather than holding them in suspension, which suits general hydraulic service.
Wide approvals
It meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers, so it matches the requirement for most industrial and mobile systems.
Where it fits
It suits machine tools and precision hydraulics specifying an ISO 32 anti-wear oil. Confirm the grade your system requires before selecting.
Cleanliness and grade selection
Hydraulic systems wear from dirty oil far more than from worn-out oil, so keep the fluid clean: store it sealed, filter on filling, and keep the system filters serviced, since fine grit is what damages pumps and valves. The lighter ISO 32 grade suits precision and cooler-running systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis indicates, and top up with the same grade. As a non-detergent oil it lets water and contaminants settle out rather than holding them in suspension, so keeping the reservoir clean and drained of water helps the anti-wear additives protect the system as intended.