Valvoline Ultramax 46 is an ISO 46 anti-wear hydraulic oil, zinc-based and non-detergent, protecting pumps and valves from wear, corrosion and high pressure. The all-round ISO 46 grade suits most industrial and mobile hydraulics, with wide approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers. The 205L drum is the bulk choice for sites running multiple hydraulic systems.
The all-round anti-wear hydraulic grade
Most hydraulic systems run best on a general-purpose ISO 46 grade, and this zinc-based, non-detergent anti-wear oil is built for exactly that broad duty. Its anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage.
How the anti-wear chemistry protects the system
The zinc anti-wear additives form a protective film on the high-pressure surfaces of pumps and valves, preventing the wear that leads to lost pressure and internal leakage. The non-detergent formulation lets water and contaminants separate out rather than holding them in suspension, which suits general hydraulic duty, while corrosion inhibitors protect the system internals.
Wide approvals
It meets DIN 51524 Part 2 HLP and ISO 11158 HM with broad approvals including Bosch Rexroth, Parker Denison, Eaton and Vickers.
Where it fits
It suits mobile and industrial hydraulics specifying a general-purpose ISO 46 oil, from loaders and tippers to factory equipment. Confirm the grade your system requires before selecting.
Cleanliness and grade selection
Because most hydraulic wear comes from contamination rather than tired oil, keep the fluid clean by storing it sealed, filtering on fill and maintaining the system filters, since fine grit scores pumps and valves. ISO 46 is the general-purpose grade that suits the majority of mobile and industrial systems, but always match to the equipment maker's recommendation. Change the oil at the recommended interval or when analysis shows it is due, and top up with the same grade. As a non-detergent oil it lets water and contaminants separate out, so draining any water from the reservoir and keeping the oil clean is what lets the anti-wear additives protect the system over the long term.