Sometimes the reel is all you need, because you already have the hose or want a specific length and fitting. The RAASM 8430.400 is the 430 Series reel supplied bare, so you fit the hose that suits your run.
It is a fixed spring-rewind reel on a painted steel reel and frame, the same 430 Series body as the hosed versions but without a hose fitted. That lets you match the hose length and end fitting to your bay rather than working around a preset line, which suits a custom fit-out or a hose replacement.
The parts that decide service life are already there: a zinc-plated steel swivel joint and polyurethane seals specified for oils, which keep a petroleum-oil reel sealing where generic seals fail early. It is rated to 150 bar (15,000 kPa / 2,176 psi) maximum working pressure, comfortably above typical workshop oil distribution.
It is rated for oils and similar products including fresh oils and antifreeze, and is not for fuels, DEF or water-based fluids. The inlet is G 1/2in (female) BSP and the outlet G 1/2in (male) BSP, so it ties into Australian plumbing without an adapter.
Being a bare reel, you supply a 1/2in oil hose to your chosen length and a dispensing gun to complete the point. Where you would rather it came fitted with hose, the 8430.401 and 8430.402 are supplied with 10 m and 15 m of 1/2in hose.