Ten metres of oil hose left across a bay is a trip hazard and a hose that gets stood on and worn, and a reel that will not rewind cleanly is no better. The RAASM 8430.401 keeps a 1/2in oil line managed for a compact workshop point, a 430 Series spring-rewind reel with 10 m of hose.
The reel runs an open spring-rewind mechanism on a painted steel reel and frame, fitted with 10 m of 1/2in black rubber hose and an automatic stopping system that holds the hose where you leave it. At 10 m it suits shorter runs where a compact, tidy dispensing point matters more than long reach.
What decides whether a reel lasts is the swivel and the seals. This one uses a zinc-plated steel swivel joint and polyurethane seals specified for oils, which is what keeps a petroleum-oil reel sealing where generic seals weep early. It is rated to 150 bar (15,000 kPa / 2,176 psi) maximum working pressure, well above typical workshop oil distribution.
It is rated for oils and similar products including fresh oils and antifreeze, and is not for fuels, DEF or water-based fluids. The inlet is G 1/2in (female) BSP and the outlet G 1/2in (male) BSP, so it connects to Australian workshop plumbing without an adapter, and a 0.6 m leader hose is included.
It is supplied with the 10 m hose but without a dispensing gun, so an oil control gun such as the RAASM 37751 or a metered gun is needed to finish the point. For longer reach in the same 1/2in class, the 8430.402 carries 15 m.