Fifteen metres of managed hose is the reach that covers a full bay from one fixed point, without a line trailing across the floor. The RAASM 8430.402 is the longer-hose 430 Series reel, carrying 15 m of 1/2in oil hose on a spring rewind.
It runs an open spring-rewind mechanism on a painted steel reel and frame, and the extra 5 m over the 10 m version is the difference between a reel that reaches the machine and one you keep repositioning around. It is the maximum hose length in the 1/2in 430 Series.
Durability comes down to the swivel and seals: a zinc-plated steel swivel joint and polyurethane seals specified for oils, which hold up to petroleum oil where generic seals weep early. It is rated to 150 bar (15,000 kPa / 2,176 psi) maximum working pressure, well above typical workshop oil distribution, so the reel is not the limiting part of the line.
It is rated for oils and similar products including fresh oils and antifreeze, and is not for fuels, DEF or water-based fluids. The inlet is G 1/2in (female) BSP and the outlet G 1/2in (male) BSP, connecting to Australian plumbing without an adapter.
It comes fitted with the 15 m hose but without a dispensing gun, so an oil control gun such as the RAASM 37751 or a metered gun completes the point. Where runs are longer than 15 m, the 530 Series carries 20 m and 25 m of 1/2in hose.