Valvoline Super Performance DOT 4 is a high-boiling glycol brake fluid for hydraulic brake and clutch systems, supplied in a 500ml top-up bottle. Its high dry and wet boiling points give real headroom over DOT 3, resisting the vapour lock and soft pedal that come from fluid boiling under sustained braking. The compact bottle suits bleeding, top-ups and single-vehicle service.
DOT 4 protection for everyday and harder driving
Brake fluid works by being incompressible, so when it boils and forms vapour the pedal goes soft and braking fades. Resisting that failure, vapour lock, is exactly what a higher-specification fluid is for. This high-boiling glycol DOT 4 fluid carries real headroom over DOT 3, holding a firm pedal where an entry-level fluid would start to soften.
Why the higher boiling point matters
Its high dry and wet boiling points are the headline. Dry boiling point is the fresh fluid; wet boiling point is after the fluid has absorbed some moisture in service, which glycol fluids always do over time. DOT 4 sits above DOT 3 on both counts, which is what keeps the pedal consistent through repeated heavy braking, towing or long descents.
Protects the system, meets the standards
Corrosion inhibitors protect the seals, cylinders and metal internals of the hydraulic system, and it meets DOT 4, SAE J1704, FMVSS 116 and AS/NZS 1960.1 Grade 3. The 500ml bottle is sealed and sized for bleeding and top-ups on a single vehicle.
Where it fits
It suits modern cars, 4WDs and light commercials that specify DOT 4, and it is a sensible choice wherever brakes work hard, from towing and hilly driving to fully loaded vehicles. Always confirm the fluid grade your vehicle calls for before topping up.
Why brake fluid needs changing
Glycol brake fluids are hygroscopic, meaning they absorb moisture from the air over time, and that moisture lowers the boiling point and promotes internal corrosion. That is why manufacturers specify a fluid change every couple of years regardless of distance, and why an opened bottle is best used promptly rather than stored half-full. Always use fresh fluid from a sealed container for a bleed or top-up, keep it off paintwork as glycol fluid can lift paint, and never mix in a silicone DOT 5 fluid, which is not compatible with glycol systems. Confirming the grade the vehicle specifies and changing on schedule keeps the pedal firm and the hydraulics protected.