When the machines are spread out and one fixed point has to reach them all, hose length becomes the limit. The RAASM 8530.401 carries 20 m of 1/2in oil hose for long reach from a single mounting, a 530 Series spring-rewind reel.
The 530 Series body holds more hose than the 430, and the spring rewind carries the weight of a full 20 m oil-filled line back onto the drum so it is retracted and off the floor between jobs rather than left trailing. That matters more at 20 m, where a loose line is a real trip hazard across a bay.
A zinc-plated steel swivel joint and polyurethane seals specified for oils are what keep the reel sealing over a long service life, where generic seals weep early on petroleum oil. It is rated to 150 bar (15,000 kPa / 2,176 psi) maximum working pressure, comfortably above typical workshop distribution.
It is rated for oils and similar products including fresh oils and antifreeze, and is not for fuels, DEF or water-based fluids. The inlet is G 1/2in (female) BSP and the outlet G 1/2in (male) BSP, so it ties into Australian plumbing without an adapter.
It comes fitted with the 20 m hose but without a dispensing gun, so an oil control gun such as the RAASM 37751 completes the point. Where you need even more reach, the 8530.402 carries 25 m, and for shorter runs the 430 Series covers 10 m and 15 m.