Twenty-five metres is the longest 1/2in reach in the range, for the bays and yards where one dispensing point has to cover real distance. The RAASM 8530.402 is the 530 Series reel fitted with 25 m of 1/2in oil hose on a spring rewind.
Carrying 25 m of hose asks the most of the rewind, and the 530 Series spring is sized to carry a full oil-filled line back onto the drum so it does not sit pooled on the floor. At this length, a reel that manages the hose is the difference between a usable long-reach point and a permanent trip hazard.
The swivel and seals decide how long it lasts. A zinc-plated steel swivel joint and polyurethane seals specified for oils keep the reel sealing where generic seals fail early on petroleum oil, and it is rated to 150 bar (15,000 kPa / 2,176 psi) maximum working pressure, above typical workshop distribution.
It is rated for oils and similar products including fresh oils and antifreeze, and is not for fuels, DEF or water-based fluids. The inlet is G 1/2in (female) BSP and the outlet G 1/2in (male) BSP, connecting to Australian plumbing without an adapter.
It is supplied with the 25 m hose but without a dispensing gun, so an oil control gun completes the point. Where 25 m is more than you need, the 8530.401 carries 20 m, and for higher oil flow the 540 Series steps up to 3/4in and 1in hose.