Higher-flow oil transfer needs a bigger-bore hose, and the 540 Series is RAASM's high-flow reel. The 8540.400 is that reel supplied bare, ready to take a 3/4in or 1in oil hose to the length your installation needs.
It is a fixed spring-rewind reel on a painted steel reel and frame, built with the larger G 1in inlet that lets the 540 Series carry the bigger-bore hose a high-flow line uses. Bare, it suits a workshop specifying its own hose length and end fitting around a high-flow pump.
The service-life parts are in place: a zinc-plated steel swivel joint and polyurethane seals specified for oils, which keep a petroleum-oil reel sealing where generic seals fail. The bare reel is rated to 150 bar (15,000 kPa / 2,176 psi) maximum working pressure, with the fitted-hose pressure set by the hose bore you choose.
It is rated for oils and similar products including fresh oils and antifreeze, and is not for fuels, DEF or water-based fluids. The inlet is G 1in (female) BSP, so it connects to Australian high-flow plumbing without an adapter.
As a bare reel you fit your own 3/4in or 1in oil hose and a dispensing gun. Where you would rather it came fitted, the 8540.412 carries 20 m of 3/4in hose at 100 bar (10,000 kPa / 1,450 psi) and the 8540.413 carries 15 m of 1in hose at 50 bar (5,000 kPa / 725 psi).