Valvoline WD Spray Lube Multispray is an all-purpose 400g aerosol that lubricates, penetrates, displaces moisture and guards against corrosion in one hit. Its synthetic corrosion inhibitors free seized fasteners, silence squeaks and lay down a clear, non-staining, water-repellent film that protects chrome, tools and moving parts.
The four-in-one can worth keeping close
Four of the most common maintenance jobs are lubricating, penetrating, displacing moisture and guarding against corrosion, and this all-purpose spray does all four at once. That is why a single can handles so much of the small, frustrating work that stops a job, from a seized bolt to a squeaking hinge to a damp electrical connection, laying down a clear, non-staining, water-repellent film as it goes.
How it works
The low-viscosity carrier creeps into threads, hinges and tight joints to free parts that have seized, while synthetic corrosion inhibitors stay behind as a protective film once the solvent flashes off. It actively displaces water from metal surfaces and connectors, which is what makes it useful after washing down equipment or working in the wet. The film it leaves is clear, non-staining and non-sticky, so it will not attract dust or mark finishes.
Safe on the surfaces you use it on
It protects chrome, bare metal and moving mechanisms and is at home across home, automotive, marine and industrial tasks. Because the film is thin and clean, it suits both the moving part you want to keep working and the tool you want to keep from rusting.
Where it fits
Keep it in the workshop, the ute and the glovebox for hinges, locks, cables, latches, battery terminals, tools and general corrosion protection. It is the everyday problem-solver you reach for first when something is stuck, squeaking or exposed to moisture.
What it is and is not for
As a light penetrating and protecting fluid, WD Spray Lube is ideal for freeing seized fasteners, displacing moisture, quieting squeaks and protecting metal and tools from corrosion. It is not a heavy-duty grease, so for high-load bearings, chains under tension or points that see sustained pressure, a purpose-made grease or chain lubricant will hold up far longer. Used for its intended jobs it is hard to beat: a quick spray frees a stuck bolt, clears a damp connection or lays down a clean protective film. Keep it out of brake friction surfaces, and let it penetrate for a minute on badly seized parts before working them loose.