An oil kit fixed to one drum in one corner is only half used when the machine is at the other end of the shed. The RAASM AF-0AMTK3 puts the whole 205 L distribution system on a 3-wheel trolley, so the oil goes to the job and gets used.
At its core is the RAASM Series 600 pneumatic piston pump at a 3:1 ratio, delivering a consistent 14 lpm for distributing oils and similar lubricants. The 3:1 ratio gives useful outlet pressure while keeping air demand sensible, running on 6 to 8 bar (600 to 800 kPa / 87 to 116 psi) shop air at an average air consumption of 330 lpm and 81 dB, matched to oils up to SAE 130.
Mobility is the difference between a kit you should use and one you do. A sturdy 3-wheel drum trolley suited to 180 kg and 205 L drums lets one person position the drum at the service bay, the pit or out in the shed, and a 4 m by 1/2in distribution hose gives reach without dragging a drum across concrete.
Control is the other half. A digital metered oil control gun dispenses to plus or minus 0.5% accuracy up to 30 lpm at 70 bar (7,000 kPa / 1,015 psi), with an IP65 meter, a swivel and rubber protection, and a double totaliser that tracks usage for tight service intervals and job costing. It handles engine, gear and hydraulic oils to SAE 130, and the 205 L drum is not included.
It serves farms, fleet workshops and earthmoving yards servicing engines, gearboxes and hydraulics on the move.
To run it you fit it to a 205 L drum on the trolley and feed it 6 to 8 bar (600 to 800 kPa / 87 to 116 psi) shop air. Where the drum stays put, the fixed AF-0A205K3 is the same metered system without the trolley, and the AF-0A205K1 is the manual-gun version.