Fleetguard FF254 spin-on fuel filter. 99.9% efficiency at 10 micron to ISO 19438, 10 lpm, M32X1.5-6H thread, 260 mm long. Not for trucks built from 2017.
Fleetguard state that this filter must not be fitted to trucks built from 2017 onward. If your vehicle is a 2017 or later build, this is the wrong part regardless of what the parts book says.
That kind of restriction usually follows a change in fuel system pressure, injection equipment or emissions specification partway through a model run, where the chassis looks identical and the requirement underneath it has moved. The number in an older catalogue stays valid for older vehicles and becomes wrong for newer ones, and nothing about the truck tells you which side of the line you are on except the build date.
Check the build plate, not the model year on the registration. If you are running a mixed-age fleet of the same model, this is worth writing on the shelf label.
The filter itself is rated 99.9% efficiency at 10 micron measured to ISO 19438, which is a strong figure for a spin-on and reflects what modern common rail injection equipment demands. Flow is 10 lpm and hydrostatic burst minimum is 1700 kPa.
Thread is M32X1.5-6H with a 102.2 mm gasket outer diameter, 260 mm long.
Cross-references confirmed across 3 or more OEM brands, including UD Trucks 5222748702 and 5222748694, and Renault 7420976001, 7485116634 and 5001868493. Full cross-reference table in the specifications tab below.