What are StrataPore and NanoNet?
They are Fleetguard's own synthetic filter media. StrataPore is a multi-layer media used in fuel filters and fuel/water separators, and NanoNet is a finer synthetic media designed to capture more of the small particles that wear high-pressure common-rail fuel systems. Fit the media your engine's service interval assumes.
Why fit a coolant filter?
On engines designed for one, the coolant filter traps scale and debris, and pre-charged types release supplemental coolant additive to keep up liner protection. Nitrite-free extended life coolants usually call for an uncharged filter, so test the coolant and check the OEM manual before choosing.
What is the difference between primary and secondary fuel filters?
The primary filter sits on the suction side, before the lift pump, and takes out water and coarser dirt. The secondary sits on the pressure side and does the fine filtration that protects the injection system. A secondary-grade element in the primary position can restrict flow and starve the engine, while a primary-grade element in the secondary position lets fine dirt through. Check the OEM manual for the rating at each position.
- Fuel filters and fuel/water separators: check micron rating, drain and sensor port.
- Lube filters: full-flow, bypass and combination.
- Air filters and OptiAir air cleaners.
- Hydraulic filters for mobile and industrial hydraulics.
- Coolant filters, charged and uncharged.
Ask us to cross-reference an OEM number, or browse axial seal air filters. Running Cummins engines? See Cummins PGXL coolant for the cooling system side.
