INOX MX3 in a 5L bottle is the bulk pack of the multi-purpose lubricant that displaces moisture, penetrates, lubricates and protects against corrosion. It comes with a 500ml spray applicator bottle, so you can decant for daily use and keep the bulk bottle on the shelf. It's made with a high-grade white oil and rust inhibitors, with no silicone, acid, kerosene or dieselene.
Why it lasts longer than a water-displacement spray
Solvent-based sprays free a part and then flash off, leaving bare metal to rust again. MX3 is oil-based, so once it has penetrated a seized thread or pushed water out of a connector, it stays there. INOX states it won't dry out, gum up, go sticky or wash off with water, which means fewer reapplications on gear that lives outdoors or gets hosed down.
Safe around electricals and most materials
MX3 is non-conductive and non-static, so it can go on terminals, plugs, connectors and switchgear to keep moisture out. It won't harm metal surfaces, hard plastics, paint, enamel, fibreglass, formica or neoprene seals. INOX describes it as non-toxic, non-corrosive and non-staining.
Where it fits
-
Workshop and fleet: seized nuts, bolts and pins, door locks and hinges, control cables, air brake slack adjusters, wiper motors and roller doors.
-
Farm: PTO splines, irrigation pump motors, gate hinges and shearing handpieces.
-
Electrical: battery terminals, plugs and connectors, fan motors and welders.
-
Machining: cutting lubricant for aluminium milling, tapping and thread cutting.
MX3 or LANOX MX4?
Choose MX3 for everyday freeing, lubricating and electrical work. For long-term storage, high humidity or salt exposure, LANOX MX4 is lanolin-based and leaves a heavier film that lasts longer between applications. With repetitive, long-term use MX3 may affect some natural rubber and soft thin plastics such as LDPE, so spot-test on those first.
Why the 5L
If your workshop goes through aerosol cans every week, the 5L bottle and refillable applicator cut the cost per job and the number of empty cans in the bin. It also suits jobs an aerosol handles poorly, such as flooding a thread before tapping. For the toolbox or ute, MX3 also comes as a 300g aerosol.