Twist&Drain™ primary fuel water separator from Donaldson's 108 mm range, rated at 99% efficiency at 10 micron (ISO 19438) and 95% emulsified water removal. Donaldson lists it against the Racor R90T spin-on.
Donaldson's guide lists the 108 mm primaries with Synteq™ media, which pairs cellulose with a meltblown synthetic layer for higher dirt-holding capacity and high-efficiency emulsified water separation, on either side of the transfer pump. Separated water settles in the base and drains through the Twist&Drain valve without removing the filter. The base also takes the X220112 water-in-fuel sensor and dash display kit.
It is the mid-length 108 mm can, 173.1 mm long, rated for up to 340 L/h (90 gph). At 10 micron it is the middle grade, inside the 7 to 25 micron range Donaldson's guide gives for current primary filters. Donaldson notes it is not for marine applications.
Donaldson doesn't publish equipment fitments for this grade.
Same size in other grades: P551065 (4 micron), P551067 (30 micron). Other lengths in stock: P551076 (243.7 mm, 450 L/h), P551026 (243.6 mm, 10 micron, 600 L/h).
It spins onto Donaldson's 108 mm fuel filter heads, which have a 1-14 UN filter thread. The hand priming pump head is rated to 480 L/h and the basic head to 600 L/h. The system is rated for #1 or #2 diesel, kerosene, biodiesel up to B20 and JP8, from -40 to 121 °C, at 210 kPa (30 psi) with a water bowl or 690 kPa (100 psi) without.
Cross-referenced to Liebherr 10044302, Renault VI 7420998349 and 7421380483, Volvo 20788794 and 20879812.