Large Twist&Drain™ primary fuel water separator for big-bore Cummins and Isuzu-powered mining and construction plant, cross-referenced to Cummins 3309437 and 3313304. Rated at 99% efficiency at 17 micron (ISO 19438) and 95% emulsified water removal.
It uses treated cellulose media. Donaldson's guide explains that treating cellulose with silicone lets water coalesce on the media and drain to the bottom of the can, while particulate stays trapped in it. This type of filter usually sits on the suction side of the fuel system to remove water and coarse dirt. Drain the water through the Twist&Drain valve without removing the filter.
It is the primary in Donaldson's 118 mm range: 310.9 mm long, 118.4 mm OD and rated for up to 840 L/h (220 gph), with a 6.9 bar (100 psi) collapse and burst rating. The base takes the P569758 clear water collection bowl (adds 50 mm), the P550865 Twist&Drain valve with a 1/2-20 UNF sensor port, the P570618 (Packard) and P570619 (Deutsch) water-in-fuel sensor valves, or the X220112 sensor and dash display kit.
Donaldson lists 69 fitments, led by Sany, Euclid, Hitachi and Komatsu excavators and haul trucks. Engines include the Isuzu 6WG1 and 6WG1X, Cummins VTA1710, VT1710, KT38C, KTA50, KTA2300 and QST30, and Scania DC16.
Pair it with the P550202 secondary, the other filter in Donaldson's 118 mm system.
Donaldson's 118 mm system is rated for #1 or #2 diesel, kerosene, biodiesel up to B20 and JP8, from -40 to 121 °C, at 210 kPa (30 psi) with a water bowl fitted or 690 kPa (100 psi) without. The 118 mm basic head has M14 x 1.5 ports, a 1-1/4-12 UNF filter thread and a maximum flow of 1,080 L/h (285 gph). Allow 38 mm under the filter to unscrew it.
Cross-referenced across 24 OEM and aftermarket brands, including Cummins 3309437 and 3313304, Hitachi 4202934, Euclid E4084262, Volvo 4084262 and Komatsu 6216749110. The full list is in the cross reference tab.