Spin-on coolant filter that releases 15 units of Donaldson SCA supplemental coolant additive, listed against Cummins 3318318. It covers Komatsu excavators, dump trucks and loaders and Cummins QSK19, KTA19 and N14 engines.
SCA is Donaldson's standard-protection chemistry. Nitrite protects against cavitation erosion and corrosion, a borate buffer holds the pH, silicate protects iron and aluminium, and benzotriazole plates copper and brass parts. Donaldson rates SCA as a substitute for DCA2 and BTE filters. If your engine is on a DCA4 or BTA Plus programme, use the matching SCA+ filter instead.
The unit count is what decides the fit. Donaldson's coolant service guide stops at 12 units, for a 60.6 to 75.7 L system on a 625-hour interval, so a 15-unit filter is for bigger cooling systems. Fit it where the engine or equipment maker calls for 15 units rather than going by thread and size. Too much additive over-concentrates the coolant and silicate drops out of solution as gel and deposits. Too little leaves the liners open to pitting and corrosion. Test the coolant with CC36089 test strips before the change.
Like most coolant filters it runs partial flow, cleaning less than 10% of the coolant at any moment, and its cellulose media is rated at 99% efficiency at 50 micron (SAE J1985). That takes out the scale, rust and casting sand that would otherwise settle in the radiator and oil cooler.
Cummins 3318318 is listed against both this filter and P552075: one is SCA, the other SCA+. Choose by the chemistry your coolant programme runs, not by the OEM number alone.
Donaldson lists 147 fitments, led by tracked excavators, dump trucks, wheel loaders, tracked dozers, trucks and haul trucks. Komatsu is the largest make, followed by Caterpillar, Hitachi, Versatile and Terex. Engines include the Cummins QSK19, KTA19, N14, NTA855 and 6CT8.3, the Caterpillar 3406, 3408 and 3412TA, and the Komatsu SAA6D170.
It is part of Donaldson's 93 mm coolant filter range. Every filter in the range spins onto the same 93 mm coolant head, which has 3/8" NPT ports and an 11/16-16 UN stud and is rated to 1,034 kPa (150 psi). Other filters in the range we stock:
- SCA+, 107 mm: P552070 (2 units), P552071 (4 units), P552072 (6 units)
- SCA+, 136 mm: P552073 (8 units), P552074 (12 units), P552075 (15 units)
- SCA+, 200 mm: P552076 (23 units)
- SCA, 136 mm: P554073 (8 units), P554074 (12 units)
- No additive: P554685 (standard service), DBC4085 (Donaldson Blue, extended service)
- Additive replenishment: DBC4088 (Donaldson Blue)
Cross-referenced across 49 OEM and aftermarket brands, including Cummins 3318318 and 3316461, Komatsu 6004111161, Caterpillar 2266566 and 1W5518, Hitachi 4228689, Doosan 91008147 and Volvo 125652107. The full list is in the cross reference tab.