Donaldson puts particle contamination behind more than 70% of hydraulic system downtime, so the element in the housing is what stands between that dirt and the pumps, valves and cylinders downstream. The Donaldson P566271 is a DT High-Performance cartridge rated Beta 1000 at 8 micron, a direct replacement for Schroeder KZ5 in the Schroeder K (HF4) size. It measures 97.9 mm OD, 40.8 mm ID and 228.6 mm long, and is rated to 20 bar (290 psi) collapse and burst.
DT cartridges use Donaldson's high-performance synthetic media, whose smooth, rounded fibres give low resistance to flow and consistent performance through the life of the element. Donaldson rates the DT design at 73% higher dirt-holding capacity and 47% lower pressure drop than a traditional filter. Epoxy-coated steel mesh supports the pleats on both sides so they hold their spacing under pressure surges, and the Viton (fluorocarbon) seal suits petroleum oils, synthetic fluids, water glycols and water/oil emulsions. Typical uses are mobile equipment hydraulics, in-plant hydraulic systems, transmissions and bearing lube oil systems.
As well as Schroeder and Parker HF4-pattern housings, it fits Donaldson's own WL15, WL16 and W451 series filter housings.
Match the micron grade to the element you are replacing: in the Schroeder number, Z3, Z5 and Z10 correspond to the DT 5, 8 and 12 micron grades. The same Schroeder K (HF4) size is also stocked as P566270 (5 micron) and P566272 (12 micron).
Cross-referenced across 11 OEM and aftermarket brands, including Schroeder KZ5, Pall HC9700FKN9H, Hydac HK005BN4HC and Parker HF4L10VQ. The full list is in the cross reference tab.