Donaldson 93 mm fuel filter head with a built-in hand priming pump and M12 x 1.5 ports. Pair it with a Twist&Drain water separator on the suction side of the transfer pump, and after a filter change you can pump fuel through by hand to refill the filter and bleed air from the system before starting.
Donaldson rates the hand priming pump head for flows up to 265 L/h (70 gph). The head is 101 mm wide and 83.5 mm high, with a 1-14 UN filter thread. Allow 22 mm under the filter to unscrew it. Optional Donaldson restriction indicators and switches fit the head, for installation on the suction side.
The 93 mm system is rated for #1 or #2 diesel, kerosene, biodiesel up to B20 and JP8, from -40 to 121 °C. Operating pressure is 210 kPa (30 psi) with a water collection bowl fitted and 690 kPa (100 psi) without one. The head comes with two plugs so you can use either the inlet or outlet port positions.
It takes any filter in Donaldson's 93 mm range. Primaries (Twist&Drain water separators): P550847 (10 micron, 265 L/h), P553207 (4 micron, 340 L/h) and P551000 (10 micron, 400 L/h). Secondaries: P551313 and P551311 (5 micron at 99.9%), DBF5817 (Donaldson Blue, 4 micron at 99.9%), and P557440, P553854 and P555627 for non-common-rail engines.
Need M14 x 1.5 ports instead? See P576614. No room for a priming pump, or running the higher flows of a secondary? The P576714 basic head has M14 x 1.5 ports and handles up to 450 L/h.