FIK-FIS60 in-tank return filter housing with a 3/4" BSP inlet port, for return flows up to 60 L/min. Donaldson supplies the standard housing without a cartridge or breather, so you choose the element grade and breather to suit your system.
FIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs a 90 mm tank opening, reaches 91 mm below the tank surface and needs 84 mm of clearance above to lift the element out. Keep the outlet well below the oil level so the returning oil doesn't foam.
The series is rated to 145 psi (1000 kPa) working pressure. The 1.5 bar (22 psi) bypass valve and its spring come with every replacement element, so each element change renews the bypass. Two 1/8" BSP indicator ports are machined into the head and supplied plugged. The head is open to the tank, so fit a breather on top to keep dust and moisture out.
Recommended maximum flow depends on the element: 60 L/min with wire mesh, 40 L/min with cellulose and 35 L/min with Synteqâ„¢ synthetic media.
Takes these FIK-FIS60 cartridges (70 mm OD x 82 mm long, 29 mm bore):
Want it ready to fit? K040811 is a complete FIK in-tank filter with an SAE-12 O-ring port that takes the same cartridges and comes with a P171527 element.
Need more flow from the same 90 mm opening? P766598 is the FIS100 housing with a 1" BSP port, up to 100 L/min.