FIK-FIS150 in-tank return filter housing with a 1-1/4" BSP inlet port, for return flows up to 150 L/min. Donaldson supplies the standard housing without a cartridge or breather, so you choose the element grade and breather to suit your system.
FIK filters mount through the top of the reservoir, so return oil is filtered as it drops back into the tank and the element changes from above without breaking any lines. It needs a 90 mm tank opening, reaches 218 mm below the tank surface and needs 212 mm of clearance above to lift the element out. Keep the outlet well below the oil level so the returning oil doesn't foam.
The series is rated to 145 psi (1000 kPa) working pressure. The 1.5 bar (22 psi) bypass valve and its spring come with every replacement element, so each element change renews the bypass. Two 1/8" BSP indicator ports are machined into the head and supplied plugged. The head is open to the tank, so fit a breather on top to keep dust and moisture out.
Recommended maximum flow depends on the element: 150 L/min with wire mesh, 120 L/min with cellulose and 110 L/min with Synteqâ„¢ synthetic media.
It takes FIK-FIS150 cartridges (70 mm OD x 210 mm long, 42 mm bore), available in wire mesh, cellulose and Synteqâ„¢ synthetic grades.
Shorter tank? P766598 is the FIS100 housing with a 1" BSP port, 141 mm below the surface and up to 100 L/min.