Valvoline VR1 Racing 10W60 is a synthetic racing oil for high-performance petrol engines run under high shear, high temperature and high rpm. The heavy 60 hot grade holds film thickness where a lighter oil would thin out, and an enhanced anti-foaming formulation keeps protection intact at sustained high revs. Meets ACEA A3/B4 and API SL/SM, with Ford WSS-M2C-153E and GM 6094M. Not recommended for vehicles fitted with catalytic converters or other aftertreatment. Supplied in a 5L pack.
Built for high shear, high heat and high rpm
Fast road, track and motorsport work loads an oil film harder than any road duty: shear rates climb, sump temperatures climb, and engine speed stays high for long stretches. VR1 Racing 10W60 is formulated for exactly those conditions, with exclusive chemistry that reduces internal friction and enhances power output under extreme service.
Why the heavy 60 hot grade matters
Oil thins as it heats, and in a hard-run performance engine the film at the bearing and ring pack is what keeps metal off metal. The 60 hot grade carries substantially more film thickness at temperature than a lighter oil, so proper film thickness is maintained even in high heat applications. That strong film, combined with specialised additives, gives high resistance against extreme pressure and high operating temperatures, while high thermal and oxidation stability resists oil breakdown over a session.
Performance at high rpm and broad approvals
An enhanced anti-foaming formulation ensures superior protection at high engine rpm, where an aerated oil loses film strength and pump pressure. It meets ACEA A3/B4 and API SL and SM, carries Ford WSS-M2C-153E and GM 6094M, and is recommended for use where Fiat 9.55535.H3 is specified.
Where it fits
It suits turbocharged and non-turbocharged petrol performance engines on fast road, track and motorsport duty, including modern high-performance engines such as BMW and Ferrari. It is not recommended for vehicles fitted with aftertreatment systems or catalytic converters. Always consult your engine builder or owner's manual before use.
Choosing and changing it
The 10W60 grade is a deliberate step up in film thickness for engines that see heat and rpm a road oil never sees, so match the oil to the duty: it is not intended for a vehicle running a catalytic converter or other aftertreatment, and a heavy 60 is the wrong choice for an engine specified on a thinner grade. Confirm what your engine calls for with the owner's manual or your engine builder before selecting. Track and motorsport use is hard on oil, so change it on a hard-use schedule rather than a road interval, and top up with the same grade.