Why does the bypass setting matter?
The bypass valve opens when the filter's pressure drop gets too high, so fluid keeps flowing to the transmission. Set too low and it opens early, sending dirty fluid through. Set too high and the filter can restrict flow when the fluid is cold, which is just as hard on shifting and lubrication.
Choosing a spin-on transmission filter
- Bypass valve setting: listed in psi on many filters. Fit the setting your transmission was designed for.
- Micron rating and media: synthetic media generally filters finer with less restriction than cellulose.
- Anti-drain valve: keeps fluid in the filter at shutdown, where one is specified.
- Mounting: check the head thread or stud size before ordering.
- Dual rating: some cans serve transmission and hydraulic duty, handy on machines with a shared sump.
How do I fit a spin-on transmission filter?
Clean the head, lubricate the new gasket with clean fluid and tighten by hand to the filter maker's instructions. Check the fluid level at the temperature the OEM manual specifies, as readings change a lot between hot and cold.
Cartridge housings take transmission filter elements, and matching fluid is in heavy duty transmission fluids. Shared circuits may also use spin-on hydraulic filters.
