Transmission Filter Elements (13)

Transmission filter elements are the replaceable cartridges for transmissions with a fixed filter housing. They're found in automatic, powershift and heavy-duty transmissions on trucks, tractors and machinery, and some come as kits with gaskets and seals. Micron rating and media are what to match, along with the housing fit. An element finer than the original can restrict flow through the circuit, and a coarser one passes the particles that wear the valve body and clutch packs. Either way the transmission pays for it. Changing the element at every fluid change also stops old contamination loading up the fresh fluid. Matching notes follow below the products.

Transmission Filter Elements

13 products

  • Baldwin PT385 Transmission Filter – Cartridge, Gaskets, 25 micron
    Vendor:
    Baldwin

    PT385 Transmission Filter- Element, Gaskets, 25 Mic

    2 in stock
    Regular price $49.50 AUD
    Sale price $49.50 AUD Regular price
  • Donaldson P575039 synthetic transmission filter cartridge for John Deere tractors with metal end caps
    Vendor:
    Donaldson

    P575039 Transmission Filter, Cartridge

    Regular price $124.40 AUD
    Sale price $124.40 AUD Regular price
  • Donaldson P560971 Transmission Filter Kit
    Vendor:
    Donaldson

    P560971 Transmission Filter Kit

    Regular price $165.90 AUD
    Sale price $165.90 AUD Regular price
  • Donaldson P166135 Transmission Filter, Cartridge
    Vendor:
    Donaldson

    P166135 Transmission Filter, Cartridge

    Regular price $369.30 AUD
    Sale price $369.30 AUD Regular price
  • Sakura EH-55070 ecological transmission filter element with white media and black end caps
    Vendor:
    Sakura

    EH-55070 Transmission Filter- Ecological Element

    Regular price $72.70 AUD
    Sale price $72.70 AUD Regular price
  • Sakura ETE-24010 Transmission Filter - Element
    Vendor:
    Sakura

    ETE-24010 Transmission Filter- Element

    2 in stock
    Regular price $11.90 AUD
    Sale price $11.90 AUD Regular price
  • Baldwin PT9417 Transmission Filter – Cartridge
    Vendor:
    Baldwin

    PT9417 Transmission Filter- Element

    1 in stock
    Regular price $54.00 AUD
    Sale price $54.00 AUD Regular price
  • Baldwin PT729 Transmission Filter – Cartridge, 27 micron
    Vendor:
    Baldwin

    PT729 Transmission Filter- Element, 27 Mic

    Regular price $174.70 AUD
    Sale price $174.70 AUD Regular price
  • Baldwin PT48 Hydraulic / Transmission Filter – Cartridge with Bail Handle, 45 micron
    Vendor:
    Baldwin

    PT48 Hydraulic / Transmission Filter- Element w Bail Handle, 45 Mic

    Regular price $43.50 AUD
    Sale price $43.50 AUD Regular price
  • Baldwin PT376 Transmission Filter – Cartridge, Reinforced Centretube, 25 micron
    Vendor:
    Baldwin

    PT376 Transmission Filter- Element, Reinforced Centretube, 25 Mic

    Regular price $55.50 AUD
    Sale price $55.50 AUD Regular price
  • Baldwin PT320-MPG Transmission Filter – Cartridge, Synthetic, 5 micron
    Vendor:
    Baldwin

    PT320-MPG Transmission Filter- Element, Synthetic, 5 Mic

    2 in stock
    Regular price $173.30 AUD
    Sale price $173.30 AUD Regular price
  • Baldwin PT319-MPG Transmission Filter – Cartridge, Synthetic, 8 micron
    Vendor:
    Baldwin

    PT319-MPG Transmission Filter- Element, Synthetic, 8 Mic

    3 in stock
    Regular price $269.50 AUD
    Sale price $269.50 AUD Regular price
  • Baldwin PT265 Transmission Filter – Cartridge, 45 micron
    Vendor:
    Baldwin

    PT265 Transmission Filter- Element, 45 Mic

    Regular price $52.50 AUD
    Sale price $52.50 AUD Regular price

Cartridge, pan filter or kit?

A cartridge sits in an external or internal housing and is changed on its own. A pan filter sits inside the sump and is reached by dropping the pan. A kit bundles the element with the gaskets and seals for the job, which saves chasing parts mid-service. Pan gaskets are often single-use, so a kit also avoids refitting one that has already been compressed.

Choosing a transmission filter element

  • Micron and media: stay with the original rating. Synthetic and cellulose media aren't always interchangeable.
  • What's included: check whether gaskets, O-rings or a pan seal come with the element.
  • Construction: features such as a reinforced centre tube or bail handle suit particular housings.
  • Housing match: elements that look alike can differ in length and seal design, so go by part number.
  • Pan and magnet: some pans carry a magnet or screen that needs cleaning at the same time.

What should I check while it's apart?

Look at the old element and the pan for debris. A fine grey film is normal wear, but metal flakes or clutch material point to a problem inside. Clean the magnet if one is fitted, and use a new gasket.

For spin-on heads see spin-on transmission filters, and get fluid from automatic and CVT transmission fluid or heavy duty transmission fluids.

Several transmission elements look alike. How do I pick the right one?

Measure all three dimensions and check the micron rating, because size alone doesn't always separate them. PT320-MPG and PT319-MPG are both 96 mm outside, 55.6 mm inside and 427 mm long; the only difference is 5 micron versus 8 micron synthetic media. Fit the grade your parts book or the old element calls for, because the finer one will load sooner.

Close outside diameters can hide very different bores, too: compare inside diameter as well. The table below lists what we hold for each element. If your housing or OEM number isn't in any product's cross-reference table, send it to us and we'll match the element.

Is the truck or machine model enough to pick a transmission element?

No. Confirm the transmission model and serial as well, because driveline variants change filter housings more often than badges do. Search the transmission maker's number, or the number off the old element, and check it in the product's cross-reference tab. The Sakura ETE-24010, for example, carries Volvo, Nissan UD and Renault numbers for the same part.

Then measure the old element. Some are stepped: the Sakura EH-55070 for the Caterpillar D6N has a 39.6 mm bore at one end and 31 mm at the other, and that difference is what locates it correctly in the housing. Measure both bores before you order.

Does a transmission element come with new seals?

Only where the title says so. PT385 is listed with gaskets, and the Donaldson P560971 is sold as a kit, though its listing doesn't state the contents; the other elements here are listed as the element only. Check the housing seals at every change and replace any that are flattened, cracked or hardened, because a new element can't seal against a damaged gasket.

The Sakura Eco transmission elements have no metal can. Do they need any special care?

Only in handling. On ETE-24010 and EH-55070 the housing on the transmission provides the pressure boundary, and the element is the only part you replace, so the whole element goes into the waste stream as one item instead of a can to drain and separate.

The trade-off is that nothing protects the pleats if the element is dropped or set down on a dirty bench. Leave it in its packaging until it goes in, hold it by the end caps, and fit it the same way round as the old one.