Fleetguard FS1022 spin-on fuel water separator. StrataPore, 95% emulsified and 95% free water separation, WIF sensor port, standpipe fitted. For Cummins ISC engines.
Water separation happens in two stages, and understanding both explains why a separator is not simply a fuel filter with a drain on it.
Fuel enters and flows inside-out through a fibrous media that lets diesel pass but attracts and holds the emulsified water suspended in it. Those microscopic droplets collect on the fibres and merge, or coalesce, into droplets large enough to behave as free water. That free water then meets a second stage of water-repellent media which will not let it through at all, so it falls out of the fuel stream and drops into the collection sump at the base.
The reason both stages matter is that most of the water in a diesel system is emulsified rather than free. A simple water-repellent barrier stops the droplets you can see and passes the ones you cannot. Coalescence is what deals with the rest.
This element separates 95% of emulsified water and 95% of free water, and carries a port for a water-in-fuel sensor so the machine can tell you when the sump needs draining rather than relying on someone remembering.
Media is StrataPore, a multilayer melt-blown synthetic. A standpipe is fitted, so the filter holds fuel when removed rather than draining the housing.
Thread is 1-14 UNS-2B. Cross-references confirmed across 5 or more OEM brands, including Cummins 4136520, Mack 5839FS1022, Case IH J800394, and BMC Trucks 9P917817. Full cross-reference table in the specifications tab below.