A drum bung that has sat tight for months will not come out with a shifter or a screwdriver, and the attempt usually ends with a chewed bung, a damaged drum flange or skinned knuckles. A drum wrench is made to engage the bung properly so it can be broken loose and refitted without damage.
The AF-AP-2315 is designed to fit most 2" and 3/4" drum plugs, so one tool covers both bungs on a standard drum. It is made from industrial grade bronze alloy that has been hardened and tempered for added strength, which matters when a bung has been overtightened or has stuck fast. At 280 mm long and 0.25 kg, it is compact enough to keep beside the drum rack or in a service truck drawer.
It is the tool that comes out every time a drum is opened or set up: removing the 2" bung to fit a drum pump, removing the 3/4" bung to fit a drum tap or vent, and refitting both once a drum is empty or being moved. That makes it a standard item wherever oil is bought in drums.
Fits most 2" and 3/4" drum plugs. Bung designs vary between drum manufacturers, so check the plug style on your drums if you use anything other than standard steel drums. The wrench is bronze alloy, but A-FLO does not rate it as non-sparking, so follow your site's procedures for opening drums of flammable liquids.
The wrench is supplied on its own. No other tools are needed to remove or refit standard drum bungs.
To set a 205L drum up for decanting, pair the wrench with the AF-AP-5246 3/4" alloy self closing drum tap for the 3/4" bung. To pump from the drum instead, the 2" bung takes a drum pump such as the AF-AP-1321 rotary barrel pump.