Fleetguard AF25963 OptiAir 1100 Series secondary air filter. Radial seal safety element, cellulose, 405.5 mm long, 122.3 mm OD. Fits John Deere, Macdon, Liebherr and Cummins Power Generation.
OptiAir is a Fleetguard air cleaner family and the number after it is the housing size. This element belongs to the 1100 Series, and the series number is the housing size, which matters more than it sounds.
An OptiAir element is dimensioned and configured for its specific housing. The inlet geometry, pre-separation and dust ejection are designed around the element that sits in it, and the two were specified together. A dimensionally similar element from a different series can physically go in and still change how the housing behaves, because the flow path it was shaped around is no longer there.
So the question before ordering is not only whether it fits, but which OptiAir series your machine runs. The housing is usually marked. If it is not, send us a photograph and we will tell you.
The AF25963 is a cellulose-media radial seal safety element, 405.5 mm long and 122.3 mm across. It is the matched secondary to the AF25962 primary. It carries no working dust load and must never be fitted as a primary.
Coverage spans John Deere and Macdon agricultural equipment, Hagie sprayers, Liebherr plant, Cummins Power Generation sets, and Mack.
Cross-references confirmed across 6 or more OEM and aftermarket brands, including Macdon 111955, Hagie 311531, Cummins Power Generation A044B765, Mack 5839AF25963, and Kirloskar 4H181001000. Full cross-reference table in the specifications tab below.