Fleetguard AF55320 Direct Flow secondary air filter. Cellulose media, 42 mm high, 226.3 mm wide. Safety element for Fleetguard primaries AF55020 and AF55021. Fits Cummins QSB4.5, QSF2.8 and QSF3.8 engines, including QSB4.5 power generation. Replaces Cummins 5310325 and Gehl 50220832.
This secondary appears on Cummins QSB4.5 power generation applications as well as general engine installations, and generator sets are where air filter service by calendar or by appearance most often goes wrong.
A standby or prime power set can run for long periods at steady load, in a plant room or enclosure where nobody looks at the air cleaner between visits. Judging an element by its colour tells you little. Fine dust that restricts airflow can leave the face only lightly marked, and a dark element is not necessarily a restrictive one. The restriction indicator is the measurement that counts, and it reads the primary and secondary together.
When the indicator calls for service, change the primary and leave this secondary in place while the housing is cleaned. If restriction stays high with a new primary fitted, the secondary is the next suspect. At 42 mm deep it is a thin panel that should not load up in normal service; if it has, the primary has been passing dust and the leak needs finding.
Cellulose media, 42 mm high and 226.3 mm wide. Media is not flame resistant.
Coverage spans Cummins QSB4.5 engines in power generation and engine applications, and Cummins QSF2.8 and QSF3.8 engines.
Cross-references confirmed across 2 OEM brands: Cummins 5310325 and Gehl 50220832. Full cross-reference table in the specifications tab below.
Fleetguard lists both AF55020 and AF55021 as primaries for this safety, so note the primary in your housing as well. Verify height and width against the element you are removing before ordering.