Fleetguard AH19490 OptiAir 800 Series air cleaner. Primary and secondary, 90 degree outlet, 2.8 to 7.5 m³/min. Plastic housing. Takes AF25960 and AF25961.
When you replace a complete air cleaner rather than an element, there is a step people skip: check the ducting between the housing and the turbocharger inlet.
That run is unfiltered downstream of the element, so anything that gets into it goes straight to the engine. Hoses perish and crack on the underside where nobody looks, clamps lose tension, and a hump hose that has been on for fifteen years has usually hardened enough to stop sealing on a slightly out of round tube. Fitting a new housing to an old duct means you have addressed the part that was working and left the part that was not.
If you are ordering a housing because the old one failed, budget for the ducting at the same time. We stock the elbows, hump hoses and reducers.
This is the 800 Series taking a primary and a safety element with a 90 degree outlet, rated 2.8 to 7.5 m³/min. Both the safety element and the angled outlet reduce capacity against the primary-only straight configuration.
Plastic construction, standard across the OptiAir range.
The elements for this housing are the AF25960 (not currently stocked) primary and the AF25961 (not currently stocked) safety element. Both are specified by Fleetguard for the Opti Air 800 series, so the pairing is not a judgement call. Order them together and the housing is complete.
No cross-references are recorded. Order against your machine details and ask us which cartridges it takes.