Fleetguard AP8403 self-cleaning pre-cleaner. 101.6 mm outlet, 2.83 to 7.79 m³/min, 215.9 mm wide, 159.51 mm high. Ejects 85% of contamination.
Dust loading is the reason most primary air filters are replaced long before their media is worn out. A pre-cleaner deals with that dust before it reaches the element, which is the only sensible place to deal with it.
Fleetguard rate this design at 85% ejection of incoming contamination, and the four stages that achieve it are worth understanding. Air enters under the dome through screened louvers, which block anything larger than the ejection slot so the unit cannot clog itself. Curved accelerator blades then throw the dirt outward against the sidewall, angled strakes walk that heavier debris around to the ejection slot, and only the cleaned air swirls down into the inlet pipe.
The AP8403 is an air pre-cleaner with a 101.6 mm outlet, rated for 2.83 to 7.79 m³/min and able to be mounted horizontally or vertically. It works by centrifugal pre-separation: incoming air is set spinning inside the body, and the heavier dust particles are thrown outward by that rotation and collected or ejected rather than carried on to the air cleaner. What reaches the primary element is a substantially reduced dust load, which translates directly into longer element life on machines working in high dust conditions.
The mounting flexibility matters more than it sounds. Being able to mount vertically or horizontally means the unit can be fitted where there is clearance rather than where the intake happens to point, which is the usual obstacle to retrofitting pre-cleaning to an existing machine.
Body diameter is 215.9 mm. Coverage runs across Caterpillar earthmoving equipment, John Deere agricultural and construction machinery, and Atlas Copco compressors and drilling plant, which is a fair description of the equipment that works in quarrying, harvesting and road construction dust.
Cross-references confirmed across 3 OEM brands, including Caterpillar 1303279 and 1217559, John Deere AT220930, and Atlas Copco 1622015502. Full cross-reference table in the specifications tab below.
Outlet size is 101.6 mm. Confirm this matches your intake ducting and check that your airflow requirement falls within the 2.83 to 7.79 m³/min range before ordering. A pre-cleaner sized below your engine's demand creates restriction rather than protection.