Fleetguard AP8405 self-cleaning pre-cleaner. 203.2 mm outlet, 22.65 to 32.56 m³/min, 457.2 mm wide, 366.78 mm high. Ejects 85% of contamination.
There are two pre-cleaners in this range with a 203.2 mm outlet, and they are not interchangeable. This one covers 22.65 to 32.56 m³/min. The AP8406 covers 32.56 to 50.97.
This is a self-cleaning design, which means there is no element to service and nothing to remember. Contamination is ejected continuously while the engine runs rather than collected in a bowl someone has to empty. Fleetguard rate the ejection at 85%, and because there is no collection vessel there is no point at which the pre-cleaner quietly stops working because a bowl filled up three weeks ago.
They meet at 32.56, and if your engine sits near that figure the choice is not obvious from the outside. Both bolt to the same ducting. Neither is marked in a way that helps once installed. Getting it wrong in one direction gives you restriction at the top of the band; in the other it gives you a unit that never develops enough rotational velocity to separate properly, which means you have paid for a pre-cleaner that is not pre-cleaning.
If your demand is anywhere near the boundary, tell us the engine and we will work it out rather than let you order on outlet size alone.
Separation here is centrifugal. Incoming air spins inside the body, heavier particles are thrown outward and ejected before reaching the air cleaner element. On engines of this size the volume of dust that stage removes over a season is considerable.
Horizontal or vertical mounting.