Fleetguard AP8406 self-cleaning pre-cleaner. 203.2 mm outlet, 32.56 to 39.64 m³/min. Same body as the AP8405, rated for the next flow band up.
This is the highest flow pre-cleaner Fleetguard build, rated to 39.64 m³/min. Engines drawing that much air are large stationary units, mining plant or industrial installations rather than anything on wheels.
At the top of the range the case for pre-cleaning is strongest, because the volume of air passing through is what determines how much dirt arrives. Fleetguard rate the ejection at 85%. Screened louvers block anything larger than the ejection slot, accelerator blades throw debris to the sidewall, and angled strakes move it to the slot while clean air swirls down the inlet.
At this scale, intake protection stops being about element cost and becomes about the turbocharger and the bores behind it. An engine of this size ingesting abrasive material does not wear gradually in a way anyone notices; the compressor wheel erodes, balance goes, and the repair bill is an order of magnitude beyond anything in the filtration system.
Separation is centrifugal. Air entering the body is set spinning, heavier particles are thrown to the wall and ejected before reaching the air cleaner. On a machine working in continuous dust, that stage removes the bulk of the load and lets the primary element do the fine work it was designed for rather than acting as a dust trap.
Note the range boundary. The AP8405 covers 22.65 to 32.56 m³/min and this unit starts where that ends. If your engine sits close to 32.56, ask us before ordering. Both units share a 203.2 mm outlet and will fit the same ducting.
Horizontal or vertical mounting.