Fleetguard AP8407 self-cleaning pre-cleaner. 50.8 mm outlet, 0.28 to 1.42 m³/min, 114.3 mm wide, 76.2 mm high. Smallest in the range.
This is the smallest pre-cleaner in the range, and small engines are where pre-cleaning is most often dismissed as unnecessary.
Small engines are not exempt from dust, and at this size the air cleaner behind the pre-cleaner has very little media area to give up. Fleetguard rate the ejection at 85% of incoming contamination. On a compact machine that is often the difference between servicing the element on schedule and servicing it whenever the engine starts labouring.
The reasoning goes that a small machine cannot generate much dust, so the element will last. In practice the opposite applies. A compact machine works close to the ground, in trenches and against walls, recirculating what it just disturbed, and its air cleaner element is correspondingly tiny with very little dust capacity. The ratio of dust to media is worse on small plant than large, not better.
The AP8407 addresses that ahead of the element. Incoming air is set spinning inside the body, heavier particles are thrown outward by that rotation and ejected rather than carried on to the filter. What reaches the media is a substantially reduced load, which on an element this size is the difference between changing it weekly and reaching a sensible interval.
Rated for 0.28 to 1.42 m³/min through a 50.8 mm outlet, with a 114.3 mm body and 76.2 mm overall height. It can be mounted horizontally or vertically, which usually decides whether a retrofit is possible at all.
Confirm your engine's airflow demand falls inside the range before ordering. A pre-cleaner sized below demand creates restriction rather than protection, and on a small engine there is no margin to absorb it.