Fleetguard AP8409 self-cleaning pre-cleaner. 101.6 mm outlet, 7.79 to 9.91 m³/min. Same body as the AP8403, rated for the next flow band up.
Read this alongside the AP8403 before ordering, because the two share an outlet size and cover different flow bands.
Fleetguard rate this design at 85% ejection of incoming contamination. What it handles is broader than dust alone: mud, snow, rain, leaves, sawdust and chaff all get thrown out the same way, because the mechanism separates on mass rather than on particle size. That matters on agricultural and forestry work, where the material in the air is organic and would blind a paper element quickly.
AP8403 is rated 2.83 to 9.91 m³/min. This one picks up where that ends, at 9.91 and running to 9.91 m³/min. Both take a 101.6 mm outlet, so both will bolt to the same ducting, and there is nothing on the outside of either to tell you which is which once fitted.
That overlap point matters. If your engine sits near 9.91 m³/min you are at the top of one unit's range and the bottom of the other's. A pre-cleaner running at the very top of its band creates restriction; one running at the very bottom does not develop enough rotational velocity to separate and eject properly. Neither failure is visible. If your demand is close to the boundary, send us the engine details and we will work out which side of it you belong on rather than let you guess.
Pre-cleaning works by centrifugal separation: incoming air is set spinning, heavier particles are thrown outward and ejected before reaching the air cleaner element. On high dust work that stage carries the bulk of the load.
Horizontal or vertical mounting, which usually determines whether a retrofit is practical.