Fleetguard CS41000 disposable centrifugal bypass rotor. ConeStaC cone stack construction, 126.6 mm long. Fits Renault Trucks, Mack, DAF and Iveco.
Fleetguard build this rotor with a ConeStaC cone stack, and that internal arrangement is what separates it from a plain spinning bowl.
A simple centrifuge throws contaminant to the outer wall of the rotor, and the distance a particle has to travel to get there is the whole radius. A cone stack fills that space with nested cones, so a particle only has to migrate across the narrow gap between two cones before it lands on a surface and is held. The settling distance drops dramatically, which means finer particles can be captured at the same rotational speed.
That matters because a centrifuge separates by density rather than by pore size. It has no media to blind and no rating to fall away, so its performance is set entirely by how far a particle must travel before it is caught. Shorten that distance and you capture smaller particles.
The practical result is a bypass stage that removes soot agglomerates and fine wear metals well below anything a full-flow filter can address at engine flow rates, and one that does not lose efficiency as it fills.
The rotor is disposable, so the accumulated cake is discarded with it rather than being cleaned out.
Coverage spans Renault Trucks, Mack, DAF and Iveco heavy vehicles.
Cross-references confirmed across 5 or more brands, including Renault 5000670735 and 5001846545, Mack 5839CS41000, Lautrette EHC8500, and Pai FOF4571. Full cross-reference table in the specifications tab below.