Fleetguard CV50634 open crankcase ventilation coalescer. 281.71 mm high, 227.09 mm wide, 68.14 mm element. Fits 2010 Cummins ISX and ISM engines.
Every diesel engine passes combustion gas past the rings into the crankcase. That blow-by carries an oil mist with it, and where it goes next is either into the atmosphere or back into the intake. Neither destination wants the oil.
The CV50634 is a coalescing element assembly for an open crankcase ventilation system, fitted to 2010 Cummins ISX and ISM engines. In an OCV arrangement the crankcase gases are vented to atmosphere rather than routed back to the air intake, which makes the coalescer the last stage before that gas leaves the engine. The cartridge captures the fine suspended oil droplets in the media and merges them into larger droplets heavy enough to drain back to the sump, so the oil is recovered rather than discharged.
Coalescing is the distinguishing mechanism. A simple mesh or baffle catches the largest droplets and passes the fine mist straight through, and fine mist is the majority of what is actually suspended in blow-by. Without a working coalescer the vent discharges an oil mist that coats the engine bay, contributes to visible emissions, and represents oil the engine is quietly consuming.
This is an element assembly rather than a bare element: 281.71 mm high and 227.09 mm across, with a 68.14 mm element. Check which of those figures your parts book is quoting before comparing against what is in the machine, because assembly height and element length are easy to confuse on this part.
Coverage is confirmed across Cummins engines and Wirtgen road construction plant.
Cross-references confirmed across 2 OEM brands, including Cummins 3685528 and 3691687, and Wirtgen 2225679. Full cross-reference table in the specifications tab below.
Verify fitment against your engine serial number and confirm your engine uses an open rather than closed crankcase ventilation arrangement before ordering. The two systems use different cartridges and are not interchangeable.