Fleetguard FF5087 spin-on fuel filter. 98.7% efficiency at 16.07 micron, 3 lpm, M20X1.5-6H thread, 84.07 mm long. Fits Clark Equipment and DAF.
At 84.07 mm long this is a short filter on a 92.1 mm body, which is a proportion worth noticing when you go to remove it.
Short, wide spin-ons are the hardest to get off. There is almost no body to grip, and a strap wrench on a stubby filter tends to crush the shell rather than turn it. A cap wrench sized to the filter is the right tool, and it is worth having the correct one in the van rather than improvising with a screwdriver through the can, which works once and makes a mess doing it.
On fitting, hand tight to gasket contact plus the marked turn. Overtightening a short filter distorts the base plate, and a distorted base plate does not seal properly next time.
Rated 98.7% efficiency at 16.07 micron with 3 lpm flow and a hydrostatic burst minimum of 1400 kPa. Thread is M20X1.5-6H with a 66 mm gasket outer diameter, which is smaller than most in this range. No standpipe is fitted.
Coverage spans Clark Equipment plant and DAF.
Cross-references confirmed across 5 or more brands, including Clark Equipment 932827, TRP DAF 1500518, Micro FT7219, Tec-Fil PSC997, and Dai.Ichi PFC317. Full cross-reference table in the specifications tab below.